Skip to main content access modal is here
Roland DG · UV LED printers

Roland VersaOBJECT LO/CO-i Series

The Roland DG VersaOBJECT LO/CO-i Series is a range of four UV LED flatbed printers for printing directly onto boards and objects up to 242 mm high and 100 kg/m². The LO-300 and LO-640 are the higher-throughput models, with 750 ml ink pouches; the CO-300i and CO-640i are the cartridge-fed models in the same family. All four run ECO-UV EUV5 inks, and are supplied with VersaWorks 7 RIP software and the Roland DG Connect app. Available from Sign to Badge Solutions.

Roland VersaOBJECT LO and CO-i Series UV flatbed printers

Key features

1Up to 242 mm print height

All four models print onto objects up to 242 mm high and 100 kg/m², with a vacuum bed as standard. That covers boards, panels and taller objects in the same family of printers.

2Four models, two bed widths

The 300 models take objects up to 762 mm wide; the 640 models take objects up to 1,625 mm wide. Print areas range from 656 × 1,450 mm on the LO-300 to 1,612 × 2,500 mm on the CO-640i.

3LO for throughput, CO-i for a simpler setup

Roland describes the LO Series as the high-production models, with two printheads in a staggered array, 750 ml pouches and speeds of up to 5.0 m²/h on the LO-640 (white then CMYK, as listed by Roland DG). The CO-i Series is listed as the more economical models, using 500 ml and 220 ml cartridges, with speeds of up to 1.6 m²/h on the CO-640i.

4Distance Mode

Distance Mode is listed for printing onto convex, concave or irregular surfaces, including trays, the inside of phone cases, bottles and other curved items.

5EUV5 inks with white, gloss, red, orange and primer

ECO-UV EUV5 inks (EUV5p pouches on the LO models) go beyond CMYK with white, gloss, red, orange and primer, depending on the configuration. Roland lists these inks as GREENGUARD Gold certified.

6VersaWorks 7 and production features

VersaWorks 7 includes automatic special colour generation and variable data printing. Other listed features include adjustable UV-LED lamp intensity, an integrated table control panel, an emergency-stop perimeter and a status beacon.

The four models

Roland DG Australia lists these four configurations. The F2 and F3 suffixes are bed-length variants: F2 on the 300 models and F3 on the 640 models shown here.

LO-300

Print area 656 × 1,450 mm; objects up to 762 mm wide. Throughput up to 3.4 m²/h (white then CMYK). EUV5p 750 ml pouches, maximum 1,200 dpi. 2,037 × 2,430 × 1,560 mm, 526 kg.

LO-640

Print area 1,520 × 2,450 mm; objects up to 1,625 mm wide. Throughput up to 5.0 m²/h (white then CMYK). EUV5p 750 ml pouches, maximum 1,200 dpi. 2,901 × 3,457 × 1,560 mm, 920 kg.

CO-300i

Print area 749 × 1,500 mm; objects up to 762 mm wide. Throughput up to 1.3 m²/h (white then CMYK). EUV5 500/220 ml cartridges, maximum 1,440 dpi. 1,928 × 2,384 × 1,469 mm, 487 kg.

CO-640i

Print area 1,612 × 2,500 mm; objects up to 1,625 mm wide. Throughput up to 1.6 m²/h (white then CMYK). EUV5 500/220 ml cartridges, maximum 1,440 dpi. 2,815 × 3,399 × 1,469 mm, 863 kg.

Specifications

Roland VersaOBJECT LO/CO-i Series specifications
SpecificationLO-300LO-640CO-300iCO-640i
Model listedLO-300-F2LO-640-F3CO-300i-F2CO-640i-F3
Printing methodPiezo inkjet
Maximum print area (W × L)656 × 1,450 mm1,520 × 2,450 mm749 × 1,500 mm1,612 × 2,500 mm
Maximum object width762 mm1,625 mm762 mm1,625 mm
Maximum object thickness242 mm
Maximum object weight100 kg/m²
Throughput, white then CMYK (as listed by Roland DG)Up to 3.4 m²/hUp to 5.0 m²/hUp to 1.3 m²/hUp to 1.6 m²/h
Ink typeECO-UV (EUV5p) 750 ml pouchECO-UV (EUV5) 500 ml cartridge (CMYK, red, orange, gloss, primer); 220 ml cartridge (white)
Colours availableCMYK, red, orange, white, gloss and primer, in a range of configurations
Ink curingBuilt-in UV-LED lamp
Maximum resolution1,200 dpi1,440 dpi
ConnectivityEthernet (100BASE-TX/1000BASE-T, automatic switching)
Power-savingAutomatic sleep
Power requirements230 V, 16 A, 2P+E
Power consumption (100% vacuum)Approx. 1.80 kW operatingApprox. 2.90 kW operatingApprox. 1.80 kW operatingApprox. 2.90 kW operating
Sleep modeApprox. 0.08 kW
Noise level (operating / standby)80 / 70 dB(A) or less90 / 80 dB(A) or less80 / 70 dB(A) or less90 / 80 dB(A) or less
Dimensions (W × D × H)2,037 × 2,430 × 1,560 mm2,901 × 3,457 × 1,560 mm1,928 × 2,384 × 1,469 mm2,815 × 3,399 × 1,469 mm
Weight526 kg920 kg487 kg863 kg
Operating environment20–32 °C, 35–80% RH, no condensation
SoftwareVersaWorks 7 RIP and the Roland DG Connect app
Included itemsPower cord, cleaning liquid, drain bottle, user’s manual and software

Specifications are taken from Roland DG Australia’s LO/CO-i Series product page. Some datasheets also list other bed-length variants (F2 and F4 on the 640 models). Roland notes that specifications may change.

What else you’ll need

Roland lists the following for setting up an LO or CO-i Series printer.

Floor space and a 230 V supply

These are large machines. The LO-640 measures 2,901 × 3,457 × 1,560 mm and weighs 920 kg; even the CO-300i is 1,928 × 2,384 × 1,469 mm and 487 kg. All four models are listed as 230 V, 16 A, 2P+E. Plan the space, access and electrical supply before delivery.

A controlled room temperature

Roland specifies 20–32 °C and 35–80% relative humidity, with no condensation.

A model and ink configuration

The choice between LO and CO-i, and between the 300 and 640 bed widths, depends on the size of the work and how much you need to produce. Ink configurations include white, gloss, red, orange and primer. Talk to us about which suits your work.

Jigs and Distance Mode

A vacuum bed comes as standard. Distance Mode helps with irregular and curved objects, and VersaWorks 7 includes variable data printing for personalising several items in one run.

Where the LO/CO-i Series fits

Interior graphic printed on glass or board with a Roland VersaOBJECT LO or CO-i Series printer
Interior décor and graphics
Packaging mock-up printed on a Roland VersaOBJECT LO or CO-i Series printer
Packaging mock-ups and proofs
Tray with a printed concave surface made on a Roland VersaOBJECT LO or CO-i Series printer
Trays and concave surfaces
Bottle printed using Distance Mode on a Roland VersaOBJECT LO or CO-i Series printer
Bottles and convex surfaces
Phone cases printed on a Roland VersaOBJECT LO or CO-i Series printer
Promotional and personalised objects
Printed table top produced on a Roland VersaOBJECT LO or CO-i Series printer
Signs, graphics and larger items
About the technology

Large-format UV flatbed printing for boards and objects

UV LED printers jet ink that is cured on the material by an ultraviolet LED lamp, so you can print directly onto rigid boards, panels and objects rather than onto a transfer or label.

The LO/CO-i Series uses ECO-UV EUV5 inks (EUV5p pouches on the LO models), with white, gloss, red, orange and primer available depending on the configuration. Distance Mode helps with irregular and curved objects, the vacuum bed holds boards and thinner materials, and VersaWorks 7 includes variable data printing for short runs of personalised items. Roland lists materials including metal, plastic, board, wood, canvas, vinyl and paper.

Suited to:

  • Interior décor
  • Industrial panels and housings
  • Trays and concave surfaces
  • Bottles and curved items
  • Promotional products
  • Signs and graphics
  • Packaging mock-ups

More UV LED printers

See all UV LED printers

Interested in the Roland VersaOBJECT LO/CO-i Series? Tell us what you want to print and we’ll help you choose between the LO and CO-i models and the right ink configuration.

Request a Quote

or call 07 3412 0285

Back to top