Epson SureColor V7000
The Epson SureColor V7000 is a 4′ × 8′ UV flatbed printer with a 1.25 × 2.50 m print area and support for media up to 80 mm thick. It uses eight Epson PrecisionCore Micro TFP printheads and a 10-colour UltraChrome UV ink set — eight process colours plus white and varnish — and has four individually adjustable vacuum zones. Available from Sign to Badge Solutions.

Key features
11.25 × 2.50 m flatbed
The print and media area is up to 1.25 × 2.50 m (4.1′ × 8.2′), with media up to 80 mm thick and 50 kg/m². An integrated media height sensor and placement pins help with set-up and alignment.
2Four adjustable vacuum zones
The bed has four individually adjustable print zones and an integrated vacuum, so you can hold a full sheet or smaller pieces without relying on tape.
310-colour UltraChrome UV ink
Eight process colours (CMYK, light cyan, light magenta, grey and red) plus white and varnish are supplied in 1 L bottles. White can be used as an undercoat on film and coloured stocks, or as a highlight. Varnish can be applied as a flood for protection and gloss, or as a spot colour.
4Eight PrecisionCore printheads
Eight 1-inch PrecisionCore Micro TFP heads (180 nozzles × 8 lines × 8 heads) use Variable Sized Droplet Technology and Precision Dot processing, with a 3.5 pl minimum droplet and a maximum resolution of 720 × 1440 dpi. Epson lists a high-speed rate of 43.1 m²/h at 360 × 720 dpi.
5Built for production
The carriage uses a linear motion guide and has an integrated ionizer, media crash sensors and an operator proximity sensor on the gantry. An industrial-style signal lamp, an integrated PC stand, and USB 3.0 complete the control layout.
6Software, installation and CoverPlus
The printer ships with a Windows UV flatbed controller application and Epson Edge Print. Epson Cloud Solution PORT, Edge Dashboard and Device Admin are listed for monitoring and support. Epson provides an installation service. The printer is supplied with on-site CoverPlus (1, 3 or 5 years) that includes parts, labour and an annual maintenance visit, subject to PORT registration and Epson’s conditions.
Specifications
| Specification | SureColor V7000 |
|---|---|
| Printer type | 4′ × 8′ UV flatbed |
| Maximum print / media size | 1.25 × 2.50 m (4.1′ × 8.2′) |
| Maximum media thickness | 80 mm |
| Maximum media weight | 50 kg/m² (non-concentrated) |
| Printheads | 8 × Epson 1″ PrecisionCore Micro TFP |
| Nozzle configuration | 180 × 8 lines × 8 heads |
| Maximum resolution | 720 × 1440 dpi |
| Minimum droplet size | 3.5 pl |
| Print technology | Variable Sized Droplet Technology (VSDT); normal and premium Fine print modes; Epson Precision Dot Technology |
| Ink | Epson UltraChrome UV; 8 colours (CMYK, light cyan, light magenta, grey, red) + White + Varnish |
| Ink capacity | 1 L bottles |
| Waste system | 2 L reusable tank |
| Selected print speeds | High Speed 43.1 m²/h (360 × 720 dpi); Speed 23.2 m²/h (720 × 720 dpi); Production 15.3 m²/h (720 × 720 dpi); Quality 10.5 m²/h (720 × 1080 dpi); High Quality 4.8 m²/h (720 × 1440 dpi). Fine modes are also listed, from 7.8 m²/h down to 0.8 m²/h. |
| Media handling | Flatbed with 4 individually adjustable print zones; integrated vacuum; integrated media height sensor; placement pins |
| Other hardware | Linear motion guide carriage; operator proximity sensor; media crash sensors; integrated ionizer; industrial-style signal lamp; integrated PC stand |
| Interface | High Speed USB 3.0 |
| Software | UV FB Controller, Epson Edge Print, Epson Edge Dashboard, Epson Device Admin, Epson Cloud Solution PORT. Compatible with a range of third-party RIP software. |
| Operating system | Windows 7 64-bit or later |
| Controller PC (minimum, as listed) | 2 GHz processor, 8 GB memory, 250 GB HDD/SSD, 1280 × 1024 or higher monitor, 64-bit Windows 7 or later, USB 3.0 and Ethernet. A computer is required for the controller; a separate PC is recommended for Epson Edge Print (3 GHz or faster CPU, separate GPU recommended, 8 GB or more memory, 250 GB or larger storage with 1 TB SSD recommended). |
| Power | 200–240 V AC, 29 A, 50/60 Hz. Typical energy use 4.8 kW operating. Epson also states that a 30 A supply with a 50 A breaker is required, and that around 8 L of long-life coolant is required for the refrigeration system. |
| Operating environment | 15–30 °C (20–25 °C recommended); 20–80% relative humidity (40–60% recommended) |
| Operating noise | 70 dB |
| Dimensions and weight (W × H × D) | Printer: 4,635 × 1,730 × 2,768 mm; 1,370 kg. Packed: 4,670 × 1,750 × 2,260 mm, 1,620 kg |
| Recommended operational space (W × H × D) | 6.6 × 2.0 × 5.1 m |
| Certifications listed | Printer: RCM, CE, RoHS. Ink: GREENGUARD, AgBB, French-VOC |
| Warranty and CoverPlus | Epson lists a limited 30-day warranty (freight not included) together with an installation service. The printer is supplied with additional on-site CoverPlus for 1, 3 or 5 years, including parts, labour and a scheduled annual on-site maintenance visit. Cover can be arranged for 2 or 4 years by adding a further year of CoverPlus, up to a maximum of 5 years in total, subject to Epson’s time limits and conditions. CoverPlus requires agreement to Epson’s terms, registration with Epson Cloud Solution PORT, and a printer connection to a network with internet access. |
| In the box | Printer with integrated vacuum, cooling unit, PC stand, a set of 1 L inks (2 × white, 2 × varnish, 1 × each of the other colours), 1 × cleaning liquid, UV coolant, utility software and user manuals (on CD), and RIP software (on DVD) |
Specifications summarised from Epson Australia’s SureColor V7000 product page and are subject to change by Epson. Print speeds are Epson figures for print speed only on a nominated image using Epson Edge Print, generally in bi-directional mode; they exclude image processing and transmission and will vary with the job, media, mode, RIP and workflow. Not all modes are supported by all media or RIP software. UV print quality is highly dependent on media selection; Epson strongly recommends extensive image testing before purchase.
What else you’ll need
Epson lists the following site and workflow requirements for the V7000.
A suitable power circuit
Single-phase 240 V power. The specification table lists 200–240 V, 29 A; the system requirements state that a 30 A supply with a 50 A breaker will be required. Around 8 L of long-life coolant is required for the refrigeration system.
Room and access
Epson recommends an operational space of 6.6 × 2.0 × 5.1 m (W × H × D). The printer itself is 4,635 × 1,730 × 2,768 mm and weighs 1,370 kg. Epson provides technicians to assist with installation and has a pre-installation checklist.
A controlled environment and extraction
Operating range 15–30 °C (20–25 °C recommended) and 20–80% relative humidity (40–60% recommended). Epson recommends a controlled environment with an extraction system that vents externally, because the process produces ozone and an odour that tends to accumulate at floor level.
Computers and a network
A PC is required for the UV flatbed controller; a separate Windows PC is recommended for Epson Edge Print (Windows only). Gigabit Ethernet with external web access is recommended for installation, registration, software activation and Epson Cloud Solution PORT. PORT registration and a two-way internet connection are required to fulfil CoverPlus.
Media testing
Epson says UV print quality is highly media-dependent and strongly recommends extensive image testing before purchase, along with a review of the ink safety data sheets and Epson’s pre-purchase and pre-installation checklists.
On the press


Ten-colour UV flatbed production
The V7000 uses eight Epson PrecisionCore Micro TFP printheads. Epson describes these as using MicroPiezo operation rather than heat to form droplets, with Variable Sized Droplet Technology for smooth gradation and an enhanced gamut, and Precision Dot processing for consistent colour. The 10-colour UltraChrome UV set combines eight process colours with white and varnish, so white can sit as an undercoat or highlight and varnish can be used as a flood or a spot colour.
Four vacuum zones, an integrated height sensor and placement pins are intended to make it practical to run mixed sheet sizes on the 1.25 × 2.50 m bed. The carriage adds an ionizer, crash sensors and an operator proximity sensor. Monitoring is handled through the on-press controller, Epson Edge Dashboard and Epson Cloud Solution PORT.
This is a large production machine: Epson specifies a 30 A circuit, a recommended 6.6 × 2.0 × 5.1 m operating space, and an extraction system that vents externally. As with other UV printers, results depend on the media, and Epson recommends thorough testing before you buy.
Suited to:
- Rigid signage and displays
- Sheets up to 1.25 × 2.50 m
- Media up to 80 mm thick
- White undercoats and highlights
- Flood and spot varnish
- Mixed sheet sizes on a zoned vacuum bed
Other UV LED printers
Look at the rest of the UV LED printer range, or go back to the category page.
Direct Color Systems
UV-21MP Small Format
Small-format UV LED flatbed with a 7-inch (18 cm) material height and an integrated vacuum table.
View product - Direct Color Systems UV-21MP Small FormatDirect Color Systems
UV-32MP Intermediate Format
Intermediate-format UV LED flatbed with a 60 x 90 cm print area and a descending table for thicker items.
View product - Direct Color Systems UV-32MP Intermediate FormatDirect Color Systems
UV-44DTS Medium Format
Medium-format UV LED flatbed with Ricoh Gen 6 printheads and a 12-inch (30 cm) material height.
View product - Direct Color Systems UV-44DTS Medium FormatDirect Color Systems
UV-84DTS Gen2 Large Format
Large-format UV LED flatbed with Ricoh Gen 6 printheads and a 12-inch (30 cm) print height.
View product - Direct Color Systems UV-84DTS Gen2 Large FormatEpson
SureColor V1060
Compact A4 desktop UV flatbed for substrates up to 210 x 297 mm and 70 mm thick.
View product - Epson SureColor V1060Epson
SureColor V4000
Compact A1+ UV flatbed for substrates up to 980 x 700 mm and 200 mm thick.
View product - Epson SureColor V4000Roland DG
VersaSTUDIO BD Series
Desktop UV flatbed printers (BD-8 and BD-12) for objects up to 102 mm high, with a built-in fume extractor.
View product - Roland DG VersaSTUDIO BD SeriesRoland DG
VersaOBJECT MO Series
A3 and A2-size UV flatbed printers (MO-180 and MO-240) for objects up to 204 mm high.
View product - Roland DG VersaOBJECT MO SeriesRoland DG
VersaObject RC-300
UV helical printer for cylindrical, tapered and curved-profile objects such as bottles and drinkware.
View product - Roland DG VersaObject RC-300
Interested in the Epson SureColor V7000? Tell us what you plan to print and we’ll help you work through site requirements, inks and the set-up.
Request a Quoteor call 07 3412 0285








