Roland VersaSTUDIO BY2-20
The Roland VersaSTUDIO BY2-20 is a compact 20-inch direct-to-film (DTF) printer for apparel, accessories and textile decoration. It uses S-PG2 ink in CMYK plus dual white, prints and cuts up to 480 mm wide, and is designed to work with Roland DG DTF Film, S-Powder, Connect Designer and VersaWorks 7. It can also cut heat-transfer vinyl for lettering, numbering and other cut-only work. Available from Sign to Badge Solutions.

Key features
1Compact 20-inch DTF printer
A desktop direct-to-film printer for apparel, accessories and textile decoration. It takes media from 150 to 515 mm wide, with a maximum printing and cutting width of 480 mm. The printer measures 1,069 × 787 × 622 mm and weighs 66 kg.
2Dual white S-PG2 ink
S-PG2 ink in five colours — cyan, magenta, yellow, black and white, with two white cartridges. Cartridges are available in 220 ml or 500 ml. Roland notes that the dual white set helps maintain density and clarity across longer runs.
3Connected design-to-print software
Roland DG Connect Designer is used to prepare artwork, including automatic white-layer generation. VersaWorks 7 manages output, including transparent PNG handling and white-layer processing. Roland DG Connect monitors printer status and maintenance. VersaWorks and Roland DG Connect are listed among the included items.
4Standalone cutting for HTV
As well as DTF printing, the BY2-20 can be used for standalone cutting of heat-transfer vinyl (HTV) graphics, lettering, numbering and other cut-only work, or for hybrid DTF/HTV jobs. Cutting speed is 10 to 150 mm/s, with a Roland CAMM-1 series blade.
5Day-to-day production features
Automated media adjustment is listed to support alignment and reduce skew. Automated maintenance functions help keep the printer ready for output. A print heater can be set between 30°C and 35°C, and a dryer between 30°C and 38°C. Connectivity is Ethernet.
6Transfers across common fabrics
Roland lists transfer-ready graphics for cotton, polyester, denim, nylon, rayon and blended fabrics, including T-shirts, sportswear, bags and aprons. Roland DG states that the BY2-20 comes with a 1 Year Heads N’ All Warranty.
The DTF process
Roland describes DTF production as a five-stage sequence, from file preparation through to heat-press transfer.
Prepare print data
Add a white base layer to the CMYK artwork in Roland DG Connect Designer or VersaWorks before printing.
Print to film
Print the design in reverse onto Roland DG DTF Film with S-PG2 CMYK and white inks, then move it to powder application while the ink is still wet.
Apply powder
Apply Roland DG S-Powder to the wet ink and remove any excess, by hand or with a compatible shaker unit.
Cure the powder
Melt and cure the powder under controlled temperature and time. Roland recommends an oven, or a shaker unit with exhaust and heat-retention functions.
Transfer with heat and pressure
Heat-press the cured film onto the fabric. Roland recommends a flatbed heat press, with pre-press, transfer and final press stages.
Applications
The BY2-20 is listed for short runs, one-offs and on-demand or small-batch work, as well as standalone cutting and hybrid DTF/HTV jobs.


Suited to:
- T-shirts
- Sportswear
- Tote bags
- Aprons
- Cotton, polyester and blends
- Denim, nylon and rayon
- Short runs and one-offs
- On-demand and small-batch work
- HTV lettering and numbering
- Hybrid DTF/HTV jobs
Specifications
| Specification | VersaSTUDIO BY2-20 |
|---|---|
| Printer type | Compact 20-inch direct-to-film (DTF) printer with standalone cutting |
| Printing method | Piezo ink-jet |
| Media width | 150 to 515 mm |
| Media thickness | Printing: max. 1.0 mm with liner. Cutting: max. 0.4 mm with liner and 0.22 mm without liner |
| Roll size | Max. outer diameter 150 mm; max. weight 6 kg; 76.2 mm (3 in) or 50.8 mm (2 in) core |
| Printing/cutting width | Max. 480 mm1 |
| Maximum resolution | 1,440 dpi |
| Ink | S-PG2 INK, 220 ml or 500 ml cartridges |
| Ink colours | Five colours (cyan, magenta, yellow, black, and white × 2) |
| Cutting speed | 10 to 150 mm/s |
| Blade force | 30 to 500 gf2 |
| Blade | Roland CAMM-1 series blade; offset 0.000 to 1.500 mm |
| Software resolution (cutting) | 0.025 mm/step |
| Media heating | Print heater 30°C to 35°C; dryer 30°C to 38°C3 |
| Connectivity | Ethernet (100BASE-TX/1000BASE-T, automatic switching) |
| Power-saving | Automatic sleep |
| Rated input | 100–240 VAC, 50/60 Hz, 2.1 A |
| Power consumption | Approx. 185 W operating; approx. 32 W sleep |
| Acoustic noise | 62 dB (A) or less operating; 60 dB (A) or less standby |
| Dimensions (W × D × H) | 1,069 × 787 × 622 mm |
| Weight | 66 kg |
| Operating environment | 20 to 28°C; 40 to 60% RH (no condensation) |
| Software (included items) | VersaWorks, Roland DG Connect. Roland also lists Connect Designer and VersaWorks 7 as part of the DTF workflow. |
| Included items | Power cord, media holders, replacement blade for separating knife, User’s Manual, software (VersaWorks, Roland DG Connect), etc. |
| Warranty (as stated by Roland DG Australia) | 1 Year Heads N’ All Warranty |
Specifications summarised from Roland DG Australia’s product page and official BY2-20 datasheet, and subject to change by Roland DG. 1 The length of printing or cutting is subject to the limitations of the program. 2 500 gf is the maximum instantaneous blade force; blade force must be adjusted to the media thickness. 3 Warm-up of 5 to 20 minutes may be required after power-up; the set temperature may not be reached depending on the ambient temperature and media width. Film, powder and ink are part of Roland’s DTF system and are not listed among the printer’s included items.
What else you’ll need
A DTF set-up involves more than the printer. Roland lists the following as part of the workflow, or as recommended.
DTF film and S-Powder
Prints are made on Roland DG DTF Film, then Roland DG S-Powder is applied to the wet ink. These consumables are part of Roland’s DTF system and are not listed in the printer’s included items.
Powder application and curing
Powder can be applied by hand or with a compatible shaker. Roland recommends an oven, or a shaker unit with exhaust and heat-retention functions, for even curing.
Heat press
A heat press transfers the cured film onto the fabric. Roland recommends a flatbed heat press, with pre-press, transfer and final press stages.
A computer
A computer on the same Ethernet network is used to run the workflow software and send print data to the printer.
Direct-to-film printing, with cutting when you need it
Direct-to-film (DTF) printing puts the design onto a PET transfer film rather than straight onto the garment. Adhesive powder is applied and cured, and the transfer is then heat-pressed onto the item. Because the adhesive does the bonding, transfers can be applied to a range of fabrics and stored until they are needed.
The BY2-20 is a dedicated DTF printer, not a direct-to-garment (DTG) machine. It also has a standalone cutter, so the same unit can cut HTV graphics, lettering and numbering, or be used in a hybrid DTF/HTV workflow.
More DTG / DTF printers
Compare the other DTG and DTF printers available from Sign to Badge Solutions.
Epson
SureColor F1060
Compact, fully enclosed A4 desktop printer for both DTG and DTFilm.
View product - Epson SureColor F1060Epson
SureColor F2260
A3+ desktop printer for direct-to-garment and direct-to-film work.
View product - Epson SureColor F2260Epson
SureColor F3000
Floor-standing A3+ DTG/DTFilm production printer with dual printheads.
View product - Epson SureColor F3000Epson
SureColor G6060 DTF
35-inch (900 mm) direct-to-film production printer with an integrated cutter.
View product - Epson SureColor G6060 DTFRoland DG
TY-300i
30-inch production DTF printer with four white ink channels and 500 ml S-PG2 cartridges.
View product - Roland TY-300iRoland DG
VersaSTUDIO BN2 Series
Desktop printer/cutters for heat-transfer apparel, decals and labels.
View product (opens in a new tab) - VersaSTUDIO BN2 Series
Interested in the Roland VersaSTUDIO BY2-20? Tell us what you plan to print and we’ll help you work through the set-up.
Request a Quoteor call 07 3412 0285





