Roland TY-300i
The Roland TY-300i is a 30-inch production direct-to-film (DTF) printer for apparel and fabric decoration. It uses S-PG2 ink in CMYK plus four white channels, with 500 ml cartridges, and has a maximum print width of 736 mm. VersaWorks and Roland DG Connect are included, and an optional shaker and dryer unit can be added for automated powder application. Available from Sign to Badge Solutions.

Key features
130-inch production DTF printer
A floor-standing direct-to-film printer with a dedicated stand included. It takes media from 182 to 762 mm wide, with a maximum printing and cutting width of 736 mm. The printer measures 2,032 × 748 × 1,415 mm and weighs 136 kg.
2Four white ink channels
S-PG2 ink in five colours — cyan, magenta, yellow, black and white, with four white cartridges in 500 ml size. Roland states that the four white channels allow cartridge swaps mid-run.
3Roland-listed print speeds
Roland lists print speeds of up to 10.9 m²/h in standard mode and 17.48 m²/h in high-speed mode. These are Roland’s published figures and will vary with the job and settings.
4VersaWorks and Roland DG Connect
VersaWorks RIP software and Roland DG Connect are listed among the included items. Roland notes that VersaWorks includes print queue management and automatic image inversion, and that Roland DG Connect is used to monitor the printer.
5Optional shaker and dryer
The TY-300i can be used with a Roland DG-approved DTF powder shaker and dryer unit for automated powder application and curing. The shaker/dryer is optional and is not listed among the printer’s included items.
6Certified inks and stated warranty
Roland states that its S-PG2 inks and powder are OEKO-TEX® ECO PASSPORT certified and REACH compliant. Roland DG Australia states that the TY-300 comes with a 2 Year Heads N’ All Warranty, with the option to purchase an additional 2 years. The TY-300 also received a Keypoint Intelligence BLI Pick Award in 2026.
Applications
Roland lists the TY-300i for apparel and fabric decoration, including the applications below.


Suited to:
- T-shirts
- Workwear
- Aprons
- Sportswear
- Bags
- Pillows
Specifications
| Specification | TY-300i |
|---|---|
| Printer type | 30-inch production direct-to-film (DTF) printer |
| Printing method | Piezo ink-jet |
| Media width | 182 to 762 mm |
| Media thickness | Printing: max. 1.0 mm with liner. Cutting: max. 0.4 mm with liner and 0.22 mm without liner |
| Roll size | Max. outer diameter 250 mm; max. weight 30 kg; 76.2 mm (3 in) or 50.8 mm (2 in) core |
| Printing/cutting width | Max. 736 mm1 |
| Maximum resolution | 1,200 dpi |
| Ink | S-PG2 INK, 500 ml cartridges |
| Ink colours | Five colours (cyan, magenta, yellow, black, and white × 4 cartridges) |
| Cutting speed | 10 to 300 mm/s |
| Blade force | 30 to 500 gf2 |
| Blade | Roland CAMM-1 series blade; offset 0.000 to 1.500 mm |
| Software resolution (cutting) | 0.025 mm/step |
| Media heating | Print heater 30°C to 38°C; dryer 30°C to 45°C3 |
| Connectivity | Ethernet (100BASE-TX/1000BASE-T, automatic switching) |
| Power-saving | Automatic sleep |
| Rated input | 100–120 / 220–240 VAC, 50/60 Hz, 6.4 / 3.0 A |
| Power consumption | Approx. 840 W operating; approx. 70 W sleep |
| Acoustic noise | 63 dB (A) or less operating; 58 dB (A) or less standby |
| Dimensions (W × D × H) | 2,032 × 748 × 1,415 mm |
| Weight | 136 kg |
| Operating environment | 20 to 28°C; 40 to 60% RH (no condensation)4 |
| Software (included items) | VersaWorks, Roland DG Connect |
| Included items | Dedicated stand, power cord, media holders, separating knife, replacement blade, cleaning liquid, drain bottle, User’s Manual, software (VersaWorks, Roland DG Connect), etc. |
| Warranty (as stated by Roland DG Australia) | 2 Year Heads N’ All Warranty, with the option to purchase an additional 2 years |
Specifications summarised from Roland DG Australia’s TY-300 product page (specification table labelled TY-300i) and the January 2026 TY-300 datasheet, and subject to change by Roland DG. Print speeds quoted in the features are Roland’s published figures and are not listed in the formal specification table. 1 The length of printing or cutting is subject to the limitations of the program. 2 500 gf is the maximum instantaneous blade force; blade force must be adjusted to the media thickness. 3 Warm-up of 5 to 20 minutes may be required after power-up; the set temperature may not be reached depending on the ambient temperature and media width. 4 Operating environment as stated by Roland DG. Film, powder, ink and the shaker/dryer unit are not listed among the printer’s included items.
What else you’ll need
A production DTF set-up involves more than the printer. Roland lists the following as part of the workflow, or as optional.
DTF film, powder and ink
Roland describes the TY-300i as part of a complete DTF set-up with certified DTF film, S-PG2 inks and powder. These consumables are not listed in the printer’s included items.
Optional shaker and dryer
A Roland DG-approved powder shaker and dryer unit can be added to automate powder application and curing. Roland notes that an attachment can connect the printer to the unit to help reduce media skew.
Heat press
A heat press is required to transfer the cured film onto the garment or fabric.
A computer
A computer on the same Ethernet network is used to run VersaWorks and send print data to the printer.
Production direct-to-film printing
Direct-to-film (DTF) printing puts the design onto a PET transfer film rather than straight onto the garment. Adhesive powder is applied and cured, and the transfer is then heat-pressed onto the item. The TY-300i is a dedicated production DTF printer, not a direct-to-garment (DTG) machine.
The current Roland DG Australia page presents this model as the TY-300i, with four white ink channels. The page address and January 2026 datasheet still use the TY-300 name; the formal specification table on the Australia page is labelled TY-300i. The specification also includes cutting, with a maximum printing and cutting width of 736 mm.
More DTG / DTF printers
Compare the other DTG and DTF printers available from Sign to Badge Solutions.
Epson
SureColor F1060
Compact, fully enclosed A4 desktop printer for both DTG and DTFilm.
View product - Epson SureColor F1060Epson
SureColor F2260
A3+ desktop printer for direct-to-garment and direct-to-film work.
View product - Epson SureColor F2260Epson
SureColor F3000
Floor-standing A3+ DTG/DTFilm production printer with dual printheads.
View product - Epson SureColor F3000Epson
SureColor G6060 DTF
35-inch (900 mm) direct-to-film production printer with an integrated cutter.
View product - Epson SureColor G6060 DTFRoland DG
VersaSTUDIO BY2-20
Compact 20-inch DTF printer with dual white ink and standalone cutting for HTV.
View product - Roland VersaSTUDIO BY2-20Roland DG
VersaSTUDIO BN2 Series
Desktop printer/cutters for heat-transfer apparel, decals and labels.
View product (opens in a new tab) - VersaSTUDIO BN2 Series
Interested in the Roland TY-300i? Tell us what you plan to print and we’ll help you work through the set-up.
Request a Quoteor call 07 3412 0285





